← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Tire question: Sorry, but ...
From:Don Hanson <dhanson928@GMAIL.COM>
Date:Sun, 29 Aug 2010 15:22:57 -0700

On Sun, Aug 29, 2010 at 2:20 PM, Mike S <mikes@flatsurface.com> wrote:

> At 01:03 PM 8/29/2010, Don Hanson wrote...
>
>  The ones I just got are marked "205/70 r 14  95T M+S" with a max load
>> rating of 1527# and they are set up for studs, but have none in them   I
>> guess, from what I have found on the net, that these are likely car tires,
>> not light truck like the other Hakkas I have.  They do have an adequate
>> load
>> rating for the weight of my van,
>>
>
> They don't have enough of a load rating to allow you to load your Vanagon
> to its rated capacity.
>
> I did a bit of research on this a while ago, and put together this summary:
>
OK, thank you for the figures.

  Using the numbers you provided, it looks like the tires I just got are
'light' by about 85lbs of load, then.  So they aren't 'rated' for a fully
loaded vanagon by about 170lbs and the sidewalls will likely be too mushy
and soft for good handling.

  Knowing our US DOT, I can live with them being under the specified load
range for a light truck by 4%.  I'd bet the DOT is at least 100% on the safe
side...And for the price I paid weighed against my current spendable
resources, I might put up with some degraded performance in my  handling, if
it isn't too bad.  After all, I do not dirve my Vanagon like a performance
vehicle, I drive it like a VW bus with poor brakes, which it is, sort of.

  Thanks again, "You get what you pay for" I guess.  I better start looking
around for two more "real" LT Hakkapelitta snows to match the ones I have...

  Don Hanson

← Previous in threadNext in thread →
Back to August 2010, week 5
Have something to add on this topic today? Revive this thread in the forum »