← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Galley lighting addition
From:Mike Miller <mwmiller6@ATT.NET>
Date:Sun, 29 Jun 2014 08:54:05 -0700

What's a pelmet?

Sounds vaguely scatological.

Mike

On Jun 29, 2014, at 8:03 AM, Rocket J Squirrel wrote:

> I've got four warm-white LED striplights gummed up in the van: one over
> the bench seat, one under the "spice rack," another atop the front edge
> of the roof cutout -- forward of the poptop latch, and another atop the
> forward edge of the upper deck. Each has its own controller so I can
> adjust lighting as desired. But it would be swell to have a remote for them.
> 
> We don't sleep in the upstairs. Mrs Elliott and I are both of small
> stature and fit fine down below.
> 
> --
> Jack "Rocket j Squirrel" Elliott
> 1984 Westfalia, auto trans,
> Bend, Ore.
> 
> On 06/27/2014 08:19 PM, Karl Wolz wrote:
>> Hang a snakelight or some such thing over the lift bar. Wonder how much longer we're CG
>> On a be able to hop down from the upper berth when we gotta pee middle of the night?
>> 
>> Karl Wolz
>> Sent from my electronic umbilicus
>> 
>>> On Jun 27, 2014, at 7:35 PM, Rocket J Squirrel <camping.elliott@GMAIL.COM> wrote:
>>> 
>>> I want controllers with a remote control. Dim the lights after getting
>>> in bed.
>>> 
>>> --
>>> Jack "Rocket j Squirrel" Elliott
>>> 1984 Westfalia, auto trans,
>>> Bend, Ore.
>>> 
>>>> On 06/27/2014 05:18 PM, Alistair Bell wrote:
>>>> Jarrett - looks good but to be honest I prefer the long strip of LEDs in a channel  on the edge of the pelmet. You saw what I did, works well enough to remove the stock galley light.
>>>> 
>>>> Neil - you should check out lee valleys led strips. I am impressed by the warm white and they now carry anodized channel that accepts diffusers. They also have nice connectors that do away with soldering to the strip.
>>>> But they don't have good controllers for our applications. I recommend the little controller from superbrite led, the controller that looks like a iPod shuffle.
>>>> 
>>>> Alistair
>>>> 
>>>> 
>>>> 
>>>>> On Jun 25, 2014, at 7:50 PM, Neil N <musomuso@GMAIL.COM> wrote:
>>>>> 
>>>>> I am constantly using my Dot-It fixture over the stove. Need to
>>>>> install real lighting!
>>>>> 
>>>>> Thanks for the blog post and info.
>>>>> 
>>>>> Neil.
>>>>> 
>>>>>> On 6/25/14, Jarrett Kupcinski <kupcinski@gmail.com> wrote:
>>>>>> I added a second galley light above the stove and boy does it make a
>>>>>> difference. No more popping popcorn in the dark! If you're interested in
>>>>>> what it looks like, I added a few brief notes and a picture to the blog. Big
>>>>>> thanks to listmember Harold Teer for helping me source the stock Westfalia
>>>>>> light.
>>>>>> 
>>>>>> http://www.kpcnsk.com/?p=598
>>>>>> 
>>>>>> -Jarrett
>>>>>> 89 Bostig'd Westy
>>>>> 
>>>>> 
>>>>> --
>>>>> Neil n
>>>>> 
>>>>> Blog: tubaneil.blogspot.ca
>>>>> 
>>>>> '88 Westy http://tinyurl.com/c8rlw6p
>>>>> 
>>>>> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>>>>> 
>>>>> Vanagon VAG *Gas* inline-VR Engine Swap Group:
>>>>> 
>>>>> http://tinyurl.com/d7gd5ej

← Previous in threadNext in thread →
Back to June 2014, week 5
Have something to add on this topic today? Revive this thread in the forum »