On Sat, Nov 14, 2020 at 12:28 PM David Boan <dboan@outlook.com> wrote:

>  I read up on it in Samba and the archive, but the problems people report
> with the stabilizer are poor or high idle and not exactly what I am
> experiencing.  Should it still idle without the stabilizer, and if so, does
> that suggest what to look at?

It should idle fine without the stabilizer module (you don't have an idle
air control valve) but be easier to stall.  People have gone long periods
without one.

All the stabilizer does is advance the timing when rpm falls below the set
point.  You'll not solve the problem until you can get it to idle without
the stabilizer -- maybe you didn't get the two plugs fully connected to
each other?

Beyond that I'm stumped.

Yrs,
d